Replacing your existing fluorescent modular ceiling lights with Integral retro-fit LED panels is a fast and easy way to enjoy significant savings on energy. You also benefit from the best of both worlds with reduced maintenance and electricity costs and a brighter environment.
There are very compelling reasons to switch; with a payback of around 1-2 years or less depending on installation, cleaning, tube replacement and disposal costs. Integral LED panels have been designed to be highly cost effective and with energy prices only going up in the long term – now is a good time to make the investment and switch.
SIZE AND POSITION
The size of the LED panel you will need will be largely governed by your existing ceiling grid. Once the old fitting is removed it takes a matter of minutes to install a drop-in Integral LED panel. Integral LED panels have an integrated LED drive with a plug-and-socket connector for rapid installation. If you are refurbishing a space – you can use the opportunity to switch to LED and optimise your lighting in terms of light output and cost. Costs can be reduced further by the use of control systems for occupancy detection. Work can be carried out in phases if required to minimise disruption. Please contact a qualified electrician for the installation of panels.
Currently, Integral LED produce panels to fit the following ceiling grids: 600 X 600 1200 X 600 1200 x 300
You will need to make sure that there is enough depth and adequate ventilation for the new panel to be fitted. If replacing traditional panels, Integral LED back-lit panels provide a perfect drop-in solution.
If you have a narrow ceiling void or want to suspend panels; Integral edge-lit LED panels are ideal. Integral LED panels have been designed to be installed in most common (24mm and 15mm) exposed ceiling grids.